• Hakkında
• NCMacro Library
  • Overview
  • Objects
    • IVisibilityAnalysisMC Object
      • Overview
      • Members
      • Methods
        • __initVisibility Method
        • AddGrid Method
        • PerformVisibilityAnalysis Method
        • ProfileOnLine Method
    • NCBDialog Object
      • Overview
      • Members
      • Methods
        • AddCombo Method
        • GetAngle Method
        • GetArea Method
        • GetCheck Method
        • GetCombo Method
        • GetCoorE Method
        • GetCoorN Method
        • GetDistance Method
        • GetFileName Method
        • GetFloat Method
        • GetInteger Method
        • GetRadio Method
        • GetString Method
        • GetVolume Method
        • GetWeight Method
        • Init Method
        • PutPrompt Method
        • setnormalcase Method
        • showmodal Method
        • ValueByName Method
    • NCBlockManager Object
      • Overview
      • Members
      • Methods
        • DelBlock Method
        • GetBlockIndex Method
        • GetBlockName Method
        • NumBlock Method
    • NCCollection Object
      • Overview
      • Members
      • Methods
        • __getnccollection Method
        • AddObject Method
        • DestroyObject Method
        • GetObject Method
        • NE Method
        • PutObject Method
    • NCComplexPoly Object
      • Overview
      • Members
      • Methods
        • add Method
        • getPolyIndexByCoor Method
        • ins Method
        • outs Method
    • NCCoor Object
      • Overview
      • Members
      • Methods
        • Assignx Method
        • GetCopy Method
        • SamePoint Method
        • SetXYZF Method
      • Properties
        • flag Property
        • x Property
        • y Property
        • z Property
    • NCDataColumn Object
      • Overview
      • Members
      • Properties
        • caption Property
        • ColumnName Property
        • IsNumeric Property
        • LookUp Property
        • NetcadObject Property
        • NetcadType Property
        • ReadOnly Property
    • NCDataColumnCollection Object
      • Overview
      • Members
      • Methods
        • GetValueByIndex Method
        • GetValueByName Method
      • Properties
        • Count Property
    • NCDataConnection Object
      • Overview
      • Members
      • Properties
        • ConnectionString Property
        • DataSource Property
        • name Property
    • NCDataConnectionCollection Object
      • Overview
      • Members
      • Methods
        • FindByIndex Method
        • FindByName Method
      • Properties
        • Count Property
    • NCDataConnectionManager Object
      • Overview
      • Members
      • Properties
        • Connections Property
    • NCDataLookUp Object
      • Overview
      • Members
      • Properties
        • DisplayColumn Property
        • Enabled Property
        • IsEmpty Property
        • NetcadObject Property
        • ValueColumn Property
    • NCDataProject Object
      • Overview
      • Members
      • Properties
        • ConnectionManager Property
    • NCDataProjectManager Object
      • Overview
      • Members
      • Properties
        • ActiveProject Property
        • Count Property
        • CurrentNCZ Property
    • NCDataRelation Object
      • Overview
      • Members
      • Properties
        • ChildColumns Property
        • ChildTable Property
        • DisplayName Property
        • name Property
        • ParentColumns Property
        • ParentTable Property
    • NCDataRelationCollection Object
      • Overview
      • Members
      • Methods
        • GetValueByDispName Method
        • GetValueByIndex Method
        • GetValueByName Method
      • Properties
        • Count Property
    • NCDataRow Object
      • Overview
      • Members
      • Methods
        • BeginEdit Method
        • Delete Method
        • EndEdit Method
        • GetAsPoly Method
        • GetGeometry Method
        • GetGeometryByName Method
        • GetName Method
        • GetNetcadObject Method
        • GetNetcadPoly Method
        • GetValueByIndex Method
        • GetValueByName Method
        • IsNull Method
        • SetGeometry Method
        • SetNetcadObject Method
        • SetNull Method
        • SetValueByIndex Method
        • SetValueByName Method
        • Update Method
      • Properties
        • FieldCount Property
        • NetcadObject Property
    • NCDatasetFilter Object
      • Overview
      • Members
      • Methods
        • __initfilter Method
      • Properties
        • ExtraSQL Property
        • FilterParams Property
        • FilterType Property
        • Poly Property
    • NCDataSource Object
      • Overview
      • Members
      • Methods
        • TableExist Method
      • Properties
        • Alias Property
        • Relations Property
        • Tables Property
    • NCDataTable Object
      • Overview
      • Members
      • Methods
        • BeginEdit Method
        • Close Method
        • NewRow Method
        • Next Method
        • Open Method
        • Update Method
      • Properties
        • Columns Property
        • Connection Property
        • Criteria Property
        • CurrentRow Property
        • DisplayName Property
        • IsClosed Property
        • IsSpatial Property
        • MaxRecordCount Property
        • Options Property
        • PrimaryKey Property
        • RecordCount Property
        • TableName Property
        • TableNameSpace Property
    • NCDataTableCollection Object
      • Overview
      • Members
      • Methods
        • GetValue Method
        • GetValueByIndex Method
        • GetValueByName Method
      • Properties
        • Count Property
    • NCEnumSet Object
      • Overview
      • Members
      • Methods
        • add Method
        • Assignx Method
        • Clear Method
        • GetAsArray Method
        • GetCopy Method
        • getitem Method
        • num Method
    • NCFilterGroupOperator Object
      • Overview
      • Members
      • Methods
        • add Method
        • AddFromXML Method
        • AddSpatialOperatorGeo Method
        • AddSpatialOperatorPoly Method
        • AddSpatialOperatorWorld Method
        • Clear Method
    • NCFilterSpatialOperator Object
      • Overview
      • Members
      • Properties
        • NetcadObject Property
    • NCGeometry Object
      • Overview
      • Members
      • Methods
        • AsGML Method
        • Buffer Method
        • Clone Method
        • Contains Method
        • CoveredBy Method
        • Covers Method
        • Crosses Method
        • Difference Method
        • Disjoint Method
        • distance Method
        • Equals Method
        • EqualsExact Method
        • GetGeometryN Method
        • Intersects Method
        • IsWithinDistance Method
        • Overlaps Method
        • Simplified Method
        • SymmetricDifference Method
        • ToText Method
        • Touches Method
        • union Method
        • Within Method
      • Properties
        • Area Property
        • IsEmpty Property
        • IsSimple Property
        • IsValid Property
        • Length Property
        • NetcadObject Property
        • NumberOfGeometries Property
        • NumberOfPoints Property
    • NCMath Object
      • Overview
      • Members
      • Methods
        • distance Method
        • EnterpolateZ Method
        • INV_side_length Method
        • INV_side_tail Method
        • intersection Method
        • midpointof Method
        • onlineseg Method
        • Polar Method
        • rotate_around Method
        • side_shoot Method
    • NCNetcadDataAdapter Object
      • Overview
      • Members
      • Methods
        • add Method
        • Delete Method
        • Update Method
      • Properties
        • Current Property
        • NetcadObject Property
        • Options Property
    • NCNetcadOperator Object
      • Overview
      • Members
      • Methods
        • Clone Method
        • Done Method
        • Edit Method
        • Run Method
      • Properties
        • Attributes Property
        • GUID Property
        • Inputs Property
        • NetcadObject Property
        • Output Property
        • ProviderGUID Property
        • Variables Property
        • Version Property
    • NCNetcadOperatorInput Object
      • Overview
      • Members
      • Properties
        • caption Property
        • DataCollection Property
        • dataTypeGUID Property
        • Max Property
        • Min Property
        • NetcadObject Property
    • NCNetcadOperatorInputCollection Object
      • Overview
      • Members
      • Methods
        • add Method
        • Clear Method
        • Contains Method
        • FindByDataTypeGUID Method
        • GetItemByCaption Method
        • getitem Method
        • IndexOf Method
        • Insert Method
        • LastIndexOf Method
        • Remove Method
        • RemoveAt Method
        • Reverse Method
        • SetItem Method
      • Properties
        • Count Property
        • NetcadObject Property
    • NCNetcadOperatorOutput Object
      • Overview
      • Members
      • Properties
        • caption Property
        • data Property
        • dataTypeGUID Property
        • NetcadObject Property
    • NCNetcadRunResult Object
      • Overview
      • Members
      • Properties
        • Message Property
        • NetcadObject Property
        • Success Property
    • NCNetcadVariable Object
      • Overview
      • Members
      • Properties
        • Attributes Property
        • caption Property
        • dataTypeGUID Property
        • DefaultValue Property
        • Description Property
        • Editor Property
        • NetcadObject Property
        • Type Property
        • TypeConverter Property
        • Value Property
    • NCNetcadVariableCollection Object
      • Overview
      • Members
      • Methods
        • add Method
        • Clear Method
        • Contains Method
        • GetItemByCaption Method
        • GetItemsByAttributes Method
        • GetItemsByDataTypeGUID Method
        • getitem Method
        • IndexOf Method
        • Insert Method
        • LastIndexOf Method
        • Remove Method
        • RemoveAt Method
        • Reverse Method
        • SetItem Method
      • Properties
        • Count Property
        • NetcadObject Property
    • NCNetcadWorkflowFactory Object
      • Overview
      • Members
      • Properties
        • WorkflowManager Property
    • NCNetcadWorkflowManager Object
      • Overview
      • Members
      • Methods
        • CreateOperator Method
        • RunOperator Method
      • Properties
        • NetcadObject Property
    • NCObjectCollection Object
      • Overview
      • Members
      • Methods
        • add Method
        • Clear Method
        • Contains Method
        • getitem Method
        • IndexOf Method
        • Insert Method
        • LastIndexOf Method
        • Remove Method
        • RemoveAt Method
        • Reverse Method
        • SetItem Method
      • Properties
        • Count Property
        • NetcadObject Property
    • NCObservationPoint Object
      • Overview
      • Members
      • Methods
        • __initobservation Method
      • Properties
        • c Property
        • DeltaAngle Property
        • distance Property
        • Height Property
        • name Property
        • ProfileDeltaDistance Property
        • ResultType Property
    • NCParameter Object
      • Overview
      • Members
      • Methods
        • __init Method
        • AddKeyAndValue Method
        • Clear Method
        • GetKeyAndValue Method
        • GetValue Method
        • IsValueExists Method
        • NumParam Method
        • SetValue Method
    • NCPline Object
      • Overview
      • Members
      • Methods
        • _GetPPLine Method
        • AddCoor Method
        • AddCoorX Method
        • Assignx Method
        • CalcLimits Method
        • CenterOfMass Method
        • Clear Method
        • DeleteCoor Method
        • DestroyPoly Method
        • DistToBegining Method
        • GetCoorX Method
        • GetCopy Method
        • GetNextTriangleFromConcavePoly Method
        • GetParalel Method
        • GetParalel2 Method
        • GetPointByDist Method
        • InPoly Method
        • IsClosed Method
        • IsCW Method
        • ispolyinpoly Method
        • OnPoly Method
        • Operation Method
        • Perim Method
        • SetClosed Method
        • SetDirection Method
        • Simplify Method
        • Traverse Method
      • Properties
        • Area Property
        • Cor Property
        • Limits Property
        • name Property
        • num Property
    • NCPolyCollection Object
      • Overview
      • Members
      • Methods
        • add Method
        • Clear Method
        • del Method
        • get Method
        • num Method
    • NCReferenceZReader Object
      • Overview
      • Members
      • Methods
        • Done Method
        • getZ Method
        • Init Method
    • NCSelectionSet Object
      • Overview
      • Members
      • Methods
        • AddSelection Method
        • DeleteAllSelecteds Method
        • GetSelectedObject Method
        • Redraw Method
        • RedrawAndRewind Method
        • Rewind Method
        • SELECT Method
      • Properties
        • NE Property
    • NCSelectStatus Object
      • Overview
      • Members
      • Methods
        • add Method
        • Clear Method
      • Properties
        • Indexs Property
        • objects Property
        • Snaps Property
    • NCShapeSelection Object
      • Overview
      • Members
      • Methods
        • FileName Method
        • SelectShape Method
      • Properties
        • refno Property
        • sembolno Property
        • size Property
    • NCSObj Object
      • Overview
      • Members
      • Methods
        • ActivateProject Method
        • AddComplexPoly Method
        • AddObject Method
        • AddObjectDB Method
        • AddObjectDBEx Method
        • AddObjectX Method
        • AddSembolFile Method
        • AppHandle Method
        • BackMessage Method
        • BlockInsert Method
        • BuildRegion Method
        • CalcZOf Method
        • ClipAndAddSelected Method
        • ClipInsidePoly Method
        • CloseLayer Method
        • ClosePercent Method
        • CopyFile Method
        • CreateLayer Method
        • CreateNewBlock Method
        • CreateProject Method
        • CurObjPos Method
        • CurrentWinHtPixel Method
        • CurrentWinWdPixel Method
        • DelObject Method
        • DrawObject Method
        • DrawObjectX Method
        • EscPressed Method
        • ExplodeObject Method
        • FastRedraw Method
        • FindWorld Method
        • FontNameOf Method
        • FontNames Method
        • FoundFontName Method
        • FoundLayer Method
        • FoundLineType Method
        • GetCurrentLayer Method
        • GetCurrentLineType Method
        • GetCurrentWindow Method
        • GetLanguage Method
        • GetLongParam Method
        • GetMessage Method
        • GetNextObject Method
        • GetNextObject2 Method
        • GetObject Method
        • GetPaftaName Method
        • GetParam Method
        • GetPlineExt Method
        • GetPolygon Method
        • GetPropXml Method
        • GetRegion Method
        • GetSensibility Method
        • GetTextLeftPoint Method
        • GetTextRefPoint Method
        • GetUnit Method
        • GetWorld Method
        • InsertFile Method
        • IntersectObjects Method
        • IsBlockDefExists Method
        • IsLayerOpen Method
        • IsNetcad6 Method
        • LayerColorOf Method
        • LayerNameOf Method
        • LoadFile Method
        • LoadFile2 Method
        • MainWindowHandle Method
        • MakeArc Method
        • MakeBlock Method
        • MakeCircle Method
        • MakeLine Method
        • MakeMunhani Method
        • MakePafta Method
        • MakePline Method
        • MakePoint Method
        • MakeRect Method
        • MakeSembol Method
        • MakeSpline Method
        • MakeText Method
        • MakeTriangle Method
        • Message Method
        • NetcadCommand Method
        • newbdialog Method
        • NewBlockManager Method
        • newc Method
        • newcollection Method
        • NewComplexPoly Method
        • NewDatasetFilter Method
        • newenumset Method
        • newGeoRaster Method
        • NewGMLConverter Method
        • NewNetcadTransformer Method
        • NewNetworkFilter Method
        • newobject Method
        • NewObservationPoint Method
        • newParameter Method
        • newpoly Method
        • NewProjection Method
        • NewProjectionConverter Method
        • newRasterProcessor Method
        • NewReferenceZReader Method
        • newselectionset Method
        • newselectstatus Method
        • newShapeSelect Method
        • NewVisibilityAnalysis Method
        • newworld Method
        • NumLayers Method
        • NumObject Method
        • ObjectExtends Method
        • OpenLayer Method
        • Place Method
        • PopUpTextEditor Method
        • Print Method
        • ProcessMessages Method
        • PutComplexPLine Method
        • PutObject Method
        • PutObjectDB Method
        • PutPlineExt Method
        • RasterProjection Method
        • ResetFilter Method
        • RunMacroFile Method
        • SaveCurWinImage Method
        • SaveToFile Method
        • SelectObjectInstant Method
        • SelectObjectInstantEx Method
        • SelectPoint Method
        • SetCurrentLayer Method
        • SetCurrentLineType Method
        • SetCurrentWindow Method
        • SetFilter Method
        • SetGroupCode Method
        • SetMessage Method
        • SetNumObject Method
        • SetParam Method
        • SetPropXml Method
        • SetSensibility Method
        • SetTransformMoveScale Method
        • ShowPercent Method
        • SnapObject Method
        • test Method
        • TextWidth Method
        • TransformObject Method
        • Undo Method
        • UpdatePercent Method
        • UpdatePercentX Method
        • WalkLine Method
        • WalkObject Method
        • WalkObjectCollection Method
        • XGetParam Method
        • XGetParam2 Method
        • XSetParam Method
      • Properties
        • SnapInfo Property
    • NCTableOptions Object
      • Overview
      • Members
      • Properties
        • AssignIdentityValues Property
        • IdentityInsert Property
    • NCWorldType Object
      • Overview
      • Members
      • Methods
        • Area Method
        • Assignx Method
        • BuildRegion Method
        • ClipLine Method
        • Expand Method
        • GetAsPline Method
        • GetCopy Method
        • GetOverlapRegion Method
        • initregion Method
        • inregion Method
        • Overlaps Method
        • updatebycoor Method
        • updatebypline Method
        • updatebyregion Method
      • Properties
        • cll Property
        • cur Property
    • Netcad3D Object
      • Overview
      • Members
      • Methods
        • BuildList Method
        • CloseNet3D Method
        • InsertFile Method
        • LoadFile Method
        • LookAt Method
        • New3DFileCreator Method
        • Repaint Method
        • SetClipDistance Method
        • SetGrid Method
        • SetPerspective Method
        • SetShadows Method
        • ShowNet3D Method
    • Netcad3DFileCreator Object
      • Overview
      • Members
      • Methods
        • AddLayer Method
        • AddProjectLayers Method
        • CloseFile Method
        • CreateFile Method
        • WriteLayers Method
        • WriteObject Method
        • WriteObjects Method
        • WriteTexture Method
    • NetcadFastEnterpolater Object
      • Overview
      • Members
      • Methods
        • After Method
        • Before Method
        • NC_CalcZof Method
    • NetcadGeometry Object
      • Overview
      • Members
      • Methods
        • __initGeo Method
        • Center Method
        • cp Method
        • Draw Method
        • GeometryType Method
        • o Method
        • p Method
        • SetObject Method
        • Zoom Method
    • NetcadGeoRasterMC Object
      • Overview
      • Members
      • Methods
        • __getraster Method
        • __init Method
        • Edit Method
        • FileName Method
        • GetParamsAsXML Method
        • HeightPix Method
        • IsGray Method
        • Limits Method
        • NumBit Method
        • SaveToFile Method
        • SetParamsAsXML Method
        • WidthPix Method
      • Properties
        • BackColor Property
        • Projection Property
        • ROI Property
    • NetcadGMLConverterMC Object
      • Overview
      • Members
      • Methods
        • Coor2GML Method
        • GML2Netcad Method
        • Netcad2GML Method
        • Object2GML Method
        • Object2OGCGML Method
    • NetcadGridMC Object
      • Overview
      • Members
      • Methods
        • __getgrid Method
        • __initgrid Method
        • ColCount Method
        • GetDataBlock Method
        • GetReliefShading Method
        • GetValue Method
        • Limits Method
        • MaxValue Method
        • MinValue Method
        • NoData Method
        • RowCount Method
    • NetcadLayerManagerMC Object
      • Overview
      • Members
      • Methods
        • add Method
        • Delete Method
        • Find Method
        • NumLayer Method
      • Properties
        • CurrentLayer Property
        • Layer Property
    • NetcadLayerMC Object
      • Overview
      • Members
      • Methods
        • CloseLayer Method
        • Edit Method
        • IsOpen Method
        • IsVisible Method
        • OpenLayer Method
      • Properties
        • __layerex Property
        • color Property
        • colorBGR Property
        • LockActive Property
        • name Property
        • PrintableActive Property
        • VisEndScale Property
        • VisibiltyActive Property
        • VisStartScale Property
        • XML Property
    • NetcadLejandMC Object
      • Overview
      • Members
      • Methods
        • __initlejand Method
        • GetLayer Method
        • SetSource Method
    • NetcadNetworkFilter Object
      • Overview
      • Members
      • Methods
        • __ApplyToNetworkEngine Method
        • AddClosedRoadKey Method
        • AddDefaultRoadKinds Method
        • AddRoadKind Method
        • Clear Method
        • SetRoadWidth Method
    • NetcadNetworkMC Object
      • Overview
      • Members
      • Methods
        • __initnetwork Method
        • Analize Method
        • FindNearestNodeCoor Method
        • FindNearestNodeIndex Method
        • LastErrors Method
        • Nod Method
        • NodCount Method
        • SetFilter Method
    • NetCadObj Object
      • Overview
      • Members
      • Methods
        • Area Method
        • Assignx Method
        • Get3DSymbolsBitmap Method
        • GetCopy Method
        • GetLineType Method
        • GetObjectAsComplexPline Method
        • GetObjectAsPline Method
        • InObject Method
        • Length Method
        • OnObject Method
      • Properties
        • angle Property
        • btype Property
        • bufstart Property
        • cls Property
        • enangle Property
        • flags Property
        • just Property
        • Limits Property
        • lt Property
        • maxz Property
        • mID Property
        • minz Property
        • numelem Property
        • objname Property
        • p1 Property
        • p2 Property
        • p3 Property
        • pbs Property
        • pcode Property
        • pname Property
        • rad Property
        • ref Property
        • renk Property
        • s Property
        • sc Property
        • SDIR Property
        • sembolno Property
        • sgn Property
        • SL Property
        • SLSTART Property
        • SR Property
        • stag Property
        • stangle Property
        • Tabaka Property
        • Tag Property
        • tarea Property
        • thicknes Property
        • w Property
        • wsc Property
        • xsc Property
        • ysc Property
    • NetcadPaletteMC Object
      • Overview
      • Members
      • Methods
        • ChooseColorIdx Method
        • ChooseColorRGB Method
        • ColorIdxToRGB Method
        • Done Method
        • RGBToColorIdx Method
        • SetColor Method
    • NetcadProjection Object
      • Overview
      • Members
      • Methods
        • __initProjection Method
        • GetAsEPSG Method
        • GetAsWKT Method
        • GetFromCurrentProject Method
        • GetProjParam Method
        • SetAsEPSG Method
        • SetAsWKT Method
        • SetProjParam Method
        • SetToCurrentProject Method
      • Properties
        • Datum Property
        • ProjectionType Property
        • Zone Property
    • NetcadProjectionConverter Object
      • Overview
      • Members
      • Methods
        • AfterTransform Method
        • BeforeTransform Method
        • ForwardCoor Method
        • ForwardObject Method
        • ForwardWorld Method
        • InverseWorld Method
      • Properties
        • DestinationProjection Property
        • SourceProjection Property
    • NetcadRasterProcessorMC Object
      • Overview
      • Members
      • Methods
        • __getproc Method
        • __init Method
        • Edit Method
        • GetInputKeyword Method
        • GetParamsAsXML Method
        • HeightPix Method
        • IsGray Method
        • Limits Method
        • MaxNumInput Method
        • MinNumInput Method
        • NumBit Method
        • SaveToFile Method
        • SetParamsAsXML Method
        • SetSource Method
        • WidthPix Method
    • NetcadRasterRegisterMC Object
      • Overview
      • Members
      • Methods
        • AddRaster Method
        • GetRaster Method
        • GetRasterFileName Method
        • GetRasterName Method
        • NumRaster Method
        • RemoveRaster Method
    • NetcadReferenceMC Object
      • Overview
      • Members
      • Methods
        • __initReference Method
        • DisplayName Method
        • FindZ Method
        • GeoRaster Method
        • Grid Method
        • IsSupport Method
        • Lejand Method
        • Limits Method
        • name Method
        • Network Method
        • Projection Method
        • ShortestPath Method
      • Properties
        • Active Property
    • NetcadReliefShadingMC Object
      • Overview
      • Members
      • Methods
        • __initshading Method
        • SaveToFile Method
        • SetWorld Method
        • SetXYAngle Method
        • SetZAngle Method
    • NetcadShortestPathMC Object
      • Overview
      • Members
      • Methods
        • __initshortest Method
        • Address Method
        • Cost Method
        • FindShortestPath Method
        • LastErrors Method
        • Poly Method
        • RoadKeys Method
        • SetFilter Method
    • NetcadStatusReportMC Object
      • Overview
      • Members
      • Methods
        • add Method
        • AddSub Method
        • Clear Method
        • InsertSub Method
        • NumItem Method
        • SetFormCaption Method
        • SetHeaderInfo Method
        • showmodal Method
        • ShowModalMsg Method
    • NetcadTransformer Object
      • Overview
      • Members
      • Methods
        • ComputeParameters Method
        • LoadDNS Method
        • SetGCP Method
        • Transform Method
      • Properties
        • TransformType Property
    • NetworkNodeMC Object
      • Overview
      • Members
      • Methods
        • __initnode Method
        • c Method
        • Cost Method
        • IsBadCost Method
    • RefmanCategoryMC Object
      • Overview
      • Members
      • Methods
        • __initCategory Method
        • IsVisible Method
        • name Method
        • NumReference Method
        • Reference Method
      • Properties
        • Active Property
        • EndScale Property
        • StartScale Property
    • RefmanMC Object
      • Overview
      • Members
      • Methods
        • Category Method
        • CategoryByName Method
        • Draw Method
        • FindReference Method
        • GetAsXml Method
        • GetSupportedReferences Method
        • Limits Method
        • NumCategory Method
        • Snap Method
    • VisibilityAnalysisMC Object
      • Overview
      • Members
      • Methods
        • __initVisibility Method
        • AddGrid Method
        • PerformVisibilityAnalysis Method
        • ProfileOnLine Method
    • XMLServiceManagerMC Object
      • Overview
      • Members
      • Methods
        • GetLastError Method
        • RunXML Method
  • Methods
    • __ApplyToNetworkEngine Method
    • __getgrid Method
    • __getnccollection Method
    • __getproc Method
    • __getraster Method
    • __init Method (NetcadGeoRasterMC)
    • __init Method (NetcadRasterProcessorMC)
    • __init Method (NCParameter)
    • __initCategory Method
    • __initfilter Method
    • __initGeo Method
    • __initgrid Method
    • __initlejand Method
    • __initnetwork Method
    • __initnode Method
    • __initobservation Method
    • __initProjection Method
    • __initReference Method
    • __initshading Method
    • __initshortest Method
    • __initVisibility Method (VisibilityAnalysisMC)
    • __initVisibility Method (IVisibilityAnalysisMC)
    • _GetPPLine Method
    • ActivateProject Method
    • add Method (NCNetcadVariableCollection)
    • add Method (NCEnumSet)
    • add Method (NCComplexPoly)
    • add Method (NCObjectCollection)
    • add Method (NCNetcadDataAdapter)
    • add Method (NetcadLayerManagerMC)
    • add Method (NCPolyCollection)
    • add Method (NCNetcadOperatorInputCollection)
    • add Method (NetcadStatusReportMC)
    • add Method (NCFilterGroupOperator)
    • add Method (NCSelectStatus)
    • AddClosedRoadKey Method
    • AddCombo Method
    • AddComplexPoly Method
    • AddCoor Method
    • AddCoorX Method
    • AddDefaultRoadKinds Method
    • AddFromXML Method
    • AddGrid Method (VisibilityAnalysisMC)
    • AddGrid Method (IVisibilityAnalysisMC)
    • AddKeyAndValue Method
    • AddLayer Method
    • AddObject Method (NCCollection)
    • AddObject Method (NCSObj)
    • AddObjectDB Method
    • AddObjectDBEx Method
    • AddObjectX Method
    • AddProjectLayers Method
    • AddRaster Method
    • Address Method
    • AddRoadKind Method
    • AddSelection Method
    • AddSembolFile Method
    • AddSpatialOperatorGeo Method
    • AddSpatialOperatorPoly Method
    • AddSpatialOperatorWorld Method
    • AddSub Method
    • After Method
    • AfterTransform Method
    • Analize Method
    • AppHandle Method
    • Area Method (NetCadObj)
    • Area Method (NCWorldType)
    • AsGML Method
    • Assignx Method (NCPline)
    • Assignx Method (NCEnumSet)
    • Assignx Method (NetCadObj)
    • Assignx Method (NCWorldType)
    • Assignx Method (NCCoor)
    • BackMessage Method
    • Before Method
    • BeforeTransform Method
    • BeginEdit Method (NCDataTable)
    • BeginEdit Method (NCDataRow)
    • BlockInsert Method
    • Buffer Method
    • BuildList Method
    • BuildRegion Method (NCWorldType)
    • BuildRegion Method (NCSObj)
    • c Method
    • CalcLimits Method
    • CalcZOf Method
    • Category Method
    • CategoryByName Method
    • Center Method
    • CenterOfMass Method
    • ChooseColorIdx Method
    • ChooseColorRGB Method
    • Clear Method (NCNetcadVariableCollection)
    • Clear Method (NCPline)
    • Clear Method (NCEnumSet)
    • Clear Method (NCObjectCollection)
    • Clear Method (NCPolyCollection)
    • Clear Method (NCNetcadOperatorInputCollection)
    • Clear Method (NetcadStatusReportMC)
    • Clear Method (NCFilterGroupOperator)
    • Clear Method (NetcadNetworkFilter)
    • Clear Method (NCParameter)
    • Clear Method (NCSelectStatus)
    • ClipAndAddSelected Method
    • ClipInsidePoly Method
    • ClipLine Method
    • Clone Method (NCGeometry)
    • Clone Method (NCNetcadOperator)
    • Close Method
    • CloseFile Method
    • CloseLayer Method (NetcadLayerMC)
    • CloseLayer Method (NCSObj)
    • CloseNet3D Method
    • ClosePercent Method
    • ColCount Method
    • ColorIdxToRGB Method
    • ComputeParameters Method
    • Contains Method (NCNetcadVariableCollection)
    • Contains Method (NCGeometry)
    • Contains Method (NCObjectCollection)
    • Contains Method (NCNetcadOperatorInputCollection)
    • Coor2GML Method
    • CopyFile Method
    • Cost Method (NetcadShortestPathMC)
    • Cost Method (NetworkNodeMC)
    • CoveredBy Method
    • Covers Method
    • cp Method
    • CreateFile Method
    • CreateLayer Method
    • CreateNewBlock Method
    • CreateOperator Method
    • CreateProject Method
    • Crosses Method
    • CurObjPos Method
    • CurrentWinHtPixel Method
    • CurrentWinWdPixel Method
    • del Method
    • DelBlock Method
    • Delete Method (NCNetcadDataAdapter)
    • Delete Method (NetcadLayerManagerMC)
    • Delete Method (NCDataRow)
    • DeleteAllSelecteds Method
    • DeleteCoor Method
    • DelObject Method
    • DestroyObject Method
    • DestroyPoly Method
    • Difference Method
    • Disjoint Method
    • DisplayName Method
    • distance Method (NCGeometry)
    • distance Method (NCMath)
    • DistToBegining Method
    • Done Method (NCReferenceZReader)
    • Done Method (NetcadPaletteMC)
    • Done Method (NCNetcadOperator)
    • Draw Method (NetcadGeometry)
    • Draw Method (RefmanMC)
    • DrawObject Method
    • DrawObjectX Method
    • Edit Method (NetcadGeoRasterMC)
    • Edit Method (NetcadLayerMC)
    • Edit Method (NCNetcadOperator)
    • Edit Method (NetcadRasterProcessorMC)
    • EndEdit Method
    • EnterpolateZ Method
    • Equals Method
    • EqualsExact Method
    • EscPressed Method
    • Expand Method
    • ExplodeObject Method
    • FastRedraw Method
    • FileName Method (NetcadGeoRasterMC)
    • FileName Method (NCShapeSelection)
    • Find Method
    • FindByDataTypeGUID Method
    • FindByIndex Method
    • FindByName Method
    • FindNearestNodeCoor Method
    • FindNearestNodeIndex Method
    • FindReference Method
    • FindShortestPath Method
    • FindWorld Method
    • FindZ Method
    • FontNameOf Method
    • FontNames Method
    • ForwardCoor Method
    • ForwardObject Method
    • ForwardWorld Method
    • FoundFontName Method
    • FoundLayer Method
    • FoundLineType Method
    • GeometryType Method
    • GeoRaster Method
    • get Method
    • Get3DSymbolsBitmap Method
    • GetAngle Method
    • GetArea Method
    • GetAsArray Method
    • GetAsEPSG Method
    • GetAsPline Method
    • GetAsPoly Method
    • GetAsWKT Method
    • GetAsXml Method
    • GetBlockIndex Method
    • GetBlockName Method
    • GetCheck Method
    • GetCombo Method
    • GetCoorE Method
    • GetCoorN Method
    • GetCoorX Method
    • GetCopy Method (NCPline)
    • GetCopy Method (NCEnumSet)
    • GetCopy Method (NetCadObj)
    • GetCopy Method (NCWorldType)
    • GetCopy Method (NCCoor)
    • GetCurrentLayer Method
    • GetCurrentLineType Method
    • GetCurrentWindow Method
    • GetDataBlock Method
    • GetDistance Method
    • GetFileName Method
    • GetFloat Method
    • GetFromCurrentProject Method
    • GetGeometry Method
    • GetGeometryByName Method
    • GetGeometryN Method
    • GetInputKeyword Method
    • GetInteger Method
    • GetItemByCaption Method (NCNetcadVariableCollection)
    • GetItemByCaption Method (NCNetcadOperatorInputCollection)
    • GetItemsByAttributes Method
    • GetItemsByDataTypeGUID Method
    • getitem Method (NCNetcadVariableCollection)
    • getitem Method (NCEnumSet)
    • getitem Method (NCObjectCollection)
    • getitem Method (NCNetcadOperatorInputCollection)
    • GetKeyAndValue Method
    • GetLanguage Method
    • GetLastError Method
    • GetLayer Method
    • GetLineType Method
    • GetLongParam Method
    • GetMessage Method
    • GetName Method
    • GetNetcadObject Method
    • GetNetcadPoly Method
    • GetNextObject Method
    • GetNextObject2 Method
    • GetNextTriangleFromConcavePoly Method
    • GetObject Method (NCCollection)
    • GetObject Method (NCSObj)
    • GetObjectAsComplexPline Method
    • GetObjectAsPline Method
    • GetOverlapRegion Method
    • GetPaftaName Method
    • GetParalel Method
    • GetParalel2 Method
    • GetParam Method
    • GetParamsAsXML Method (NetcadGeoRasterMC)
    • GetParamsAsXML Method (NetcadRasterProcessorMC)
    • GetPlineExt Method
    • GetPointByDist Method
    • GetPolygon Method
    • getPolyIndexByCoor Method
    • GetProjParam Method
    • GetPropXml Method
    • GetRadio Method
    • GetRaster Method
    • GetRasterFileName Method
    • GetRasterName Method
    • GetRegion Method
    • GetReliefShading Method
    • GetSelectedObject Method
    • GetSensibility Method
    • GetString Method
    • GetSupportedReferences Method
    • GetTextLeftPoint Method
    • GetTextRefPoint Method
    • GetUnit Method
    • GetValue Method (NetcadGridMC)
    • GetValue Method (NCDataTableCollection)
    • GetValue Method (NCParameter)
    • GetValueByDispName Method
    • GetValueByIndex Method (NCDataRelationCollection)
    • GetValueByIndex Method (NCDataTableCollection)
    • GetValueByIndex Method (NCDataColumnCollection)
    • GetValueByIndex Method (NCDataRow)
    • GetValueByName Method (NCDataRelationCollection)
    • GetValueByName Method (NCDataTableCollection)
    • GetValueByName Method (NCDataColumnCollection)
    • GetValueByName Method (NCDataRow)
    • GetVolume Method
    • GetWeight Method
    • GetWorld Method
    • getZ Method
    • GML2Netcad Method
    • Grid Method
    • HeightPix Method (NetcadGeoRasterMC)
    • HeightPix Method (NetcadRasterProcessorMC)
    • IndexOf Method (NCNetcadVariableCollection)
    • IndexOf Method (NCObjectCollection)
    • IndexOf Method (NCNetcadOperatorInputCollection)
    • Init Method (NCBDialog)
    • Init Method (NCReferenceZReader)
    • InObject Method
    • InPoly Method
    • Insert Method (NCNetcadVariableCollection)
    • Insert Method (NCObjectCollection)
    • Insert Method (NCNetcadOperatorInputCollection)
    • InsertFile Method (Netcad3D)
    • InsertFile Method (NCSObj)
    • InsertSub Method
    • IntersectObjects Method
    • Intersects Method
    • INV_side_length Method
    • INV_side_tail Method
    • InverseWorld Method
    • IsBadCost Method
    • IsBlockDefExists Method
    • IsClosed Method
    • IsCW Method
    • IsGray Method (NetcadGeoRasterMC)
    • IsGray Method (NetcadRasterProcessorMC)
    • IsLayerOpen Method
    • IsNetcad6 Method
    • IsNull Method
    • IsOpen Method
    • IsSupport Method
    • IsValueExists Method
    • IsVisible Method (NetcadLayerMC)
    • IsVisible Method (RefmanCategoryMC)
    • IsWithinDistance Method
    • initregion Method
    • inregion Method
    • ins Method
    • intersection Method
    • ispolyinpoly Method
    • LastErrors Method (NetcadShortestPathMC)
    • LastErrors Method (NetcadNetworkMC)
    • LastIndexOf Method (NCNetcadVariableCollection)
    • LastIndexOf Method (NCObjectCollection)
    • LastIndexOf Method (NCNetcadOperatorInputCollection)
    • LayerColorOf Method
    • LayerNameOf Method
    • Lejand Method
    • Length Method
    • Limits Method (NetcadGeoRasterMC)
    • Limits Method (NetcadGridMC)
    • Limits Method (NetcadReferenceMC)
    • Limits Method (RefmanMC)
    • Limits Method (NetcadRasterProcessorMC)
    • LoadDNS Method
    • LoadFile Method (Netcad3D)
    • LoadFile Method (NCSObj)
    • LoadFile2 Method
    • LookAt Method
    • MainWindowHandle Method
    • MakeArc Method
    • MakeBlock Method
    • MakeCircle Method
    • MakeLine Method
    • MakeMunhani Method
    • MakePafta Method
    • MakePline Method
    • MakePoint Method
    • MakeRect Method
    • MakeSembol Method
    • MakeSpline Method
    • MakeText Method
    • MakeTriangle Method
    • MaxNumInput Method
    • MaxValue Method
    • Message Method
    • midpointof Method
    • MinNumInput Method
    • MinValue Method
    • name Method (RefmanCategoryMC)
    • name Method (NetcadReferenceMC)
    • NC_CalcZof Method
    • NE Method
    • Netcad2GML Method
    • NetcadCommand Method
    • Network Method
    • New3DFileCreator Method
    • newbdialog Method
    • NewBlockManager Method
    • newc Method
    • newcollection Method
    • NewComplexPoly Method
    • NewDatasetFilter Method
    • newenumset Method
    • newGeoRaster Method
    • NewGMLConverter Method
    • NewNetcadTransformer Method
    • NewNetworkFilter Method
    • newobject Method
    • NewObservationPoint Method
    • newParameter Method
    • newpoly Method
    • NewProjection Method
    • NewProjectionConverter Method
    • newRasterProcessor Method
    • NewReferenceZReader Method
    • NewRow Method
    • newselectionset Method
    • newselectstatus Method
    • newShapeSelect Method
    • NewVisibilityAnalysis Method
    • newworld Method
    • Next Method
    • Nod Method
    • NoData Method
    • NodCount Method
    • num Method (NCEnumSet)
    • num Method (NCPolyCollection)
    • NumBit Method (NetcadGeoRasterMC)
    • NumBit Method (NetcadRasterProcessorMC)
    • NumBlock Method
    • NumCategory Method
    • NumItem Method
    • NumLayer Method
    • NumLayers Method
    • NumObject Method
    • NumParam Method
    • NumRaster Method
    • NumReference Method
    • o Method
    • Object2GML Method
    • Object2OGCGML Method
    • ObjectExtends Method
    • onlineseg Method
    • OnObject Method
    • OnPoly Method
    • Open Method
    • OpenLayer Method (NetcadLayerMC)
    • OpenLayer Method (NCSObj)
    • Operation Method
    • outs Method
    • Overlaps Method (NCGeometry)
    • Overlaps Method (NCWorldType)
    • p Method
    • PerformVisibilityAnalysis Method (VisibilityAnalysisMC)
    • PerformVisibilityAnalysis Method (IVisibilityAnalysisMC)
    • Perim Method
    • Place Method
    • Polar Method
    • Poly Method
    • PopUpTextEditor Method
    • Print Method
    • ProcessMessages Method
    • ProfileOnLine Method (VisibilityAnalysisMC)
    • ProfileOnLine Method (IVisibilityAnalysisMC)
    • Projection Method
    • PutComplexPLine Method
    • PutObject Method (NCCollection)
    • PutObject Method (NCSObj)
    • PutObjectDB Method
    • PutPlineExt Method
    • PutPrompt Method
    • RasterProjection Method
    • Redraw Method
    • RedrawAndRewind Method
    • Reference Method
    • Remove Method (NCNetcadVariableCollection)
    • Remove Method (NCObjectCollection)
    • Remove Method (NCNetcadOperatorInputCollection)
    • RemoveAt Method (NCNetcadVariableCollection)
    • RemoveAt Method (NCObjectCollection)
    • RemoveAt Method (NCNetcadOperatorInputCollection)
    • RemoveRaster Method
    • Repaint Method
    • ResetFilter Method
    • Reverse Method (NCNetcadVariableCollection)
    • Reverse Method (NCObjectCollection)
    • Reverse Method (NCNetcadOperatorInputCollection)
    • Rewind Method
    • RGBToColorIdx Method
    • RoadKeys Method
    • rotate_around Method
    • RowCount Method
    • Run Method
    • RunMacroFile Method
    • RunOperator Method
    • RunXML Method
    • SamePoint Method
    • SaveCurWinImage Method
    • SaveToFile Method (NetcadGeoRasterMC)
    • SaveToFile Method (NetcadReliefShadingMC)
    • SaveToFile Method (NCSObj)
    • SaveToFile Method (NetcadRasterProcessorMC)
    • SELECT Method
    • SelectObjectInstant Method
    • SelectObjectInstantEx Method
    • SelectPoint Method
    • SelectShape Method
    • SetAsEPSG Method
    • SetAsWKT Method
    • SetClipDistance Method
    • SetClosed Method
    • SetColor Method
    • SetCurrentLayer Method
    • SetCurrentLineType Method
    • SetCurrentWindow Method
    • SetDirection Method
    • SetFilter Method (NetcadShortestPathMC)
    • SetFilter Method (NetcadNetworkMC)
    • SetFilter Method (NCSObj)
    • SetFormCaption Method
    • SetGCP Method
    • SetGeometry Method
    • SetGrid Method
    • SetGroupCode Method
    • SetHeaderInfo Method
    • SetItem Method (NCNetcadVariableCollection)
    • SetItem Method (NCObjectCollection)
    • SetItem Method (NCNetcadOperatorInputCollection)
    • SetMessage Method
    • SetNetcadObject Method
    • setnormalcase Method
    • SetNull Method
    • SetNumObject Method
    • SetObject Method
    • SetParam Method
    • SetParamsAsXML Method (NetcadGeoRasterMC)
    • SetParamsAsXML Method (NetcadRasterProcessorMC)
    • SetPerspective Method
    • SetProjParam Method
    • SetPropXml Method
    • SetRoadWidth Method
    • SetSensibility Method
    • SetShadows Method
    • SetSource Method (NetcadLejandMC)
    • SetSource Method (NetcadRasterProcessorMC)
    • SetToCurrentProject Method
    • SetTransformMoveScale Method
    • SetValue Method
    • SetValueByIndex Method
    • SetValueByName Method
    • SetWorld Method
    • SetXYAngle Method
    • SetXYZF Method
    • SetZAngle Method
    • ShortestPath Method
    • showmodal Method (NCBDialog)
    • showmodal Method (NetcadStatusReportMC)
    • ShowModalMsg Method
    • ShowNet3D Method
    • ShowPercent Method
    • side_shoot Method
    • Simplified Method
    • Simplify Method
    • Snap Method
    • SnapObject Method
    • SymmetricDifference Method
    • TableExist Method
    • test Method
    • TextWidth Method
    • ToText Method
    • Touches Method
    • Transform Method
    • TransformObject Method
    • Traverse Method
    • Undo Method
    • union Method
    • Update Method (NCNetcadDataAdapter)
    • Update Method (NCDataTable)
    • Update Method (NCDataRow)
    • updatebycoor Method
    • updatebypline Method
    • updatebyregion Method
    • UpdatePercent Method
    • UpdatePercentX Method
    • ValueByName Method
    • WalkLine Method
    • WalkObject Method
    • WalkObjectCollection Method
    • WidthPix Method (NetcadGeoRasterMC)
    • WidthPix Method (NetcadRasterProcessorMC)
    • Within Method
    • WriteLayers Method
    • WriteObject Method
    • WriteObjects Method
    • WriteTexture Method
    • XGetParam Method
    • XGetParam2 Method
    • XSetParam Method
    • Zoom Method
  • Properties
    • __layerex Property
    • Active Property (RefmanCategoryMC)
    • Active Property (NetcadReferenceMC)
    • ActiveProject Property
    • Alias Property
    • angle Property
    • Area Property (NCPline)
    • Area Property (NCGeometry)
    • AssignIdentityValues Property
    • Attributes Property (NCNetcadVariable)
    • Attributes Property (NCNetcadOperator)
    • BackColor Property
    • btype Property
    • bufstart Property
    • c Property
    • caption Property (NCNetcadOperatorOutput)
    • caption Property (NCNetcadVariable)
    • caption Property (NCDataColumn)
    • caption Property (NCNetcadOperatorInput)
    • ChildColumns Property
    • ChildTable Property
    • cll Property
    • cls Property
    • color Property
    • colorBGR Property
    • ColumnName Property
    • Columns Property
    • Connection Property
    • ConnectionManager Property
    • Connections Property
    • ConnectionString Property
    • Cor Property
    • Count Property (NCNetcadVariableCollection)
    • Count Property (NCDataRelationCollection)
    • Count Property (NCObjectCollection)
    • Count Property (NCDataProjectManager)
    • Count Property (NCDataConnectionCollection)
    • Count Property (NCDataTableCollection)
    • Count Property (NCNetcadOperatorInputCollection)
    • Count Property (NCDataColumnCollection)
    • Criteria Property
    • cur Property
    • Current Property
    • CurrentLayer Property
    • CurrentNCZ Property
    • CurrentRow Property
    • data Property
    • DataCollection Property
    • DataSource Property
    • dataTypeGUID Property (NCNetcadOperatorOutput)
    • dataTypeGUID Property (NCNetcadVariable)
    • dataTypeGUID Property (NCNetcadOperatorInput)
    • Datum Property
    • DefaultValue Property
    • DeltaAngle Property
    • Description Property
    • DestinationProjection Property
    • DisplayColumn Property
    • DisplayName Property (NCDataTable)
    • DisplayName Property (NCDataRelation)
    • distance Property
    • Editor Property
    • Enabled Property
    • enangle Property
    • EndScale Property
    • ExtraSQL Property
    • FieldCount Property
    • FilterParams Property
    • FilterType Property
    • flag Property
    • flags Property
    • GUID Property
    • Height Property
    • IdentityInsert Property
    • Indexs Property
    • Inputs Property
    • IsClosed Property
    • IsEmpty Property (NCGeometry)
    • IsEmpty Property (NCDataLookUp)
    • IsNumeric Property
    • IsSimple Property
    • IsSpatial Property
    • IsValid Property
    • just Property
    • Layer Property
    • Length Property
    • Limits Property (NCPline)
    • Limits Property (NetCadObj)
    • LockActive Property
    • LookUp Property
    • lt Property
    • Max Property
    • MaxRecordCount Property
    • maxz Property
    • Message Property
    • mID Property
    • Min Property
    • minz Property
    • name Property (NetcadLayerMC)
    • name Property (NCPline)
    • name Property (NCDataConnection)
    • name Property (NCObservationPoint)
    • name Property (NCDataRelation)
    • NE Property
    • NetcadObject Property (NCNetcadVariableCollection)
    • NetcadObject Property (NCNetcadOperatorOutput)
    • NetcadObject Property (NCNetcadWorkflowManager)
    • NetcadObject Property (NCNetcadVariable)
    • NetcadObject Property (NCGeometry)
    • NetcadObject Property (NCObjectCollection)
    • NetcadObject Property (NCDataColumn)
    • NetcadObject Property (NCNetcadDataAdapter)
    • NetcadObject Property (NCDataLookUp)
    • NetcadObject Property (NCNetcadOperatorInputCollection)
    • NetcadObject Property (NCNetcadOperator)
    • NetcadObject Property (NCNetcadRunResult)
    • NetcadObject Property (NCDataRow)
    • NetcadObject Property (NCNetcadOperatorInput)
    • NetcadObject Property (NCFilterSpatialOperator)
    • NetcadType Property
    • num Property
    • NumberOfGeometries Property
    • NumberOfPoints Property
    • numelem Property
    • objects Property
    • objname Property
    • Options Property (NCNetcadDataAdapter)
    • Options Property (NCDataTable)
    • Output Property
    • p1 Property
    • p2 Property
    • p3 Property
    • ParentColumns Property
    • ParentTable Property
    • pbs Property
    • pcode Property
    • pname Property
    • Poly Property
    • PrimaryKey Property
    • PrintableActive Property
    • ProfileDeltaDistance Property
    • Projection Property
    • ProjectionType Property
    • ProviderGUID Property
    • rad Property
    • ReadOnly Property
    • RecordCount Property
    • ref Property
    • refno Property
    • Relations Property
    • renk Property
    • ResultType Property
    • ROI Property
    • s Property
    • sc Property
    • SDIR Property
    • sembolno Property (NCShapeSelection)
    • sembolno Property (NetCadObj)
    • sgn Property
    • size Property
    • SL Property
    • SLSTART Property
    • SnapInfo Property
    • Snaps Property
    • SourceProjection Property
    • SR Property
    • stag Property
    • stangle Property
    • StartScale Property
    • Success Property
    • Tabaka Property
    • TableName Property
    • TableNameSpace Property
    • Tables Property
    • Tag Property
    • tarea Property
    • thicknes Property
    • TransformType Property
    • Type Property
    • TypeConverter Property
    • Value Property
    • ValueColumn Property
    • Variables Property
    • Version Property
    • VisEndScale Property
    • VisibiltyActive Property
    • VisStartScale Property
    • w Property
    • WorkflowManager Property
    • wsc Property
    • x Property
    • XML Property
    • xsc Property
    • y Property
    • ysc Property
    • z Property
    • Zone Property
  • Enumerations
    • PolyOperations Enumeration
• Netcad Sabitleri - JavaScripts
  • Renkler
  • Global Object Tag Constants
  • Object Tag Names
  • Message Modes
  • Cursorler
  • Undo Modes
  • File Types
  • Netcad. Getparam. Set Param
  • Netcad. Get Param 1
  • Netcad. Get. Param 2
  • Netcad. Set Param
• Netcad Sabitleri - VBScripts
  • Renkler
  • Global_Object_Tag_constants
  • Object_Tag_Names
  • Message_Modes
  • Cursorler
  • Undo_modes
  • FileTypes
  • Netcad.GetParam1
  • Netcad.GetParam.SetParam
  • Netcad.GetParam
  • Netcad.SetParam